亚洲色图10p,久久婷婷五月综合色欧美蜜芽,成人毛片无码一区二区三区,亚洲成av人在线视

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

tailplate hydraulic cylinder Sold to The Philippines

Release time:2023-11-12 15:32:17 Hits: Current position: Home > News

This article mainly introduces:

The Philippines hydraulic cylinder,tailplate hydraulic cylinder manufacturer,tailplate hydraulic cylinder

The Philippines tailplate hydraulic cylinder

(The Philippines tailplate hydraulic cylinder,produced by Hengyu Group)

tailplate hydraulic cylinder are widely used in The Philippines,because of powerful torque,clever hydraulic energy conversion,simple structure and reliable operation.So our company has designed tailplate hydraulic cylinder for customers from The Philippines.

Introduction to tailplate hydraulic cylinder:

When the tailplate hydraulic cylinder thrust is insufficient, check the hydraulic circuit for leaks. Including leakage of valves and hydraulic lines. The inspection method is to check and eliminate the leakage of the hydraulic connection line by manipulating the reversing valve. Also consider the relief valve. If the relief valve enters the dirt and jams the spool, so that the relief valve is normally open, the hydraulic oil will flow directly back to the tank through the relief valve bypass, resulting in no oil in the tailplate hydraulic cylinder. If the load is too large, although the regulating pressure of the relief valve has reached the maximum rating, the tailplate hydraulic cylinder still cannot get the thrust required for continuous action without action. If the regulating pressure is low, the pressure is insufficient to achieve the required vertebra force, which is manifested as insufficient thrust. Check and adjust the relief valve at this time.

Under normal circumstances, the tailplate hydraulic cylinder is composed of the rear end cover, body, piston, piston rod and front end cover and other main parts. In order to prevent the working medium from leaking out of the tailplate hydraulic cylinder or from the high pressure chamber to the low pressure chamber, a sealing device (sealing ring) is arranged between the tailplate hydraulic cylinder and the end cover, the piston and the piston rod, the piston and the tailplate hydraulic cylinder, the piston rod and the front end cover. A dustproof device is also provided on the outside of the front end cover. In order to prevent the piston from impacting the end cap when it moves rapidly to the end of the stroke, the end of the tailplate hydraulic cylinder can also be provided with a buffer device. If necessary, the exhaust device should be set in order to exhaust.

If the tailplate hydraulic cylinder slips or crawls, please check whether there is astringency inside the tailplate hydraulic cylinder, because the internal parts of the tailplate hydraulic cylinder are improperly assembled, the parts are deformed, worn or the shape and position tolerance is excessive, the action resistance is too large, so that the piston speed of the tailplate hydraulic cylinder changes with the different stroke position, and the slip or crawl occurs. Most of the reasons are due to poor assembly quality of parts, surface scars or sintered iron filings, so that the resistance increases, the speed decreases. For example, the piston is different from the piston rod or the piston rod is bent, the tailplate hydraulic cylinder or the piston rod is offset from the mounting position of the guide rail, and the sealing ring is too tight or too loose. The solution is to repair or adjust, replace damaged parts and remove iron filings.

When purchasing the tailplate hydraulic cylinder, try to clarify the following parameters of the tailplate hydraulic cylinder: A. tailplate hydraulic cylinder diameter, rod diameter, stroke; B. Working pressure or tailplate hydraulic cylinder load; C. Working environment temperature; D. Working medium; E. Operating speed; F. Other parameters, such as connection form, mounting size, etc. In this way, the right tailplate hydraulic cylinder type can be found accurately and quickly.

Answers to some questions about tailplate hydraulic cylinder:

How big gear pump need to use for 60*100 cylinder?
One cylinder size alone does not determine the size of the pump used. Choose the size of the pump, at least to know 1, the size of the load is how much, by the size of the load and the size of the cylinder and other conditions can be calculated the pressure required by the hydraulic system. 2. Speed of operation. From this speed and cylinder size, the required flow rate of the system is calculated. The relevant parameters of the pump can be selected by the pressure and flow rate to determine what kind of pump is required.

What factors does the movement speed of the cylinder in the hydraulic system depend on?
The hydraulic system should be the piston movement in the cylinder, and the speed should also be the speed of the piston, according to the piston speed formula: v=4qm/pai*(D^2-d^2) where q is the flow rate of the input hydraulic cylinder, m is the volumetric efficiency of the hydraulic cylinder, D, d is the diameter of the piston and piston rod, because other factors are determined, the movement speed of the cylinder depends on the flow rate.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
日本不卡一区二区三区旧区五区区六| 美女操逼视频www| 小穴一区在线视频| 69久视频| 欧美玩嫩逼不卡视频| 亚洲1区少妇乱| 国产精品亚洲一区二区三区喷水| 啊啊啊~嗯嗯~啊~视频爽| 国产免费一卡av| 欧美操逼日韩后入| 网友自拍人妻偷拍| 五月婷婷亚洲中文字幕在线| 日本一区 黄色| 91麻豆国精| 日韩区香蕉视频在线| 日韩欧美高清视频日韩成人| 奶子啊啊嗯啊视频| 国产绝美嫩逼| 午夜美女福利啪| 大鸡巴干大姨妈逼| 午夜成人福利视频XXXX| 中文字幕一二区二三区人妻专区| 国产无遮挡啪啪啪| 深夜福利网一区二区| 日本AAA性视频| 日韩中文字幕无码一区| 超碰抠逼在线| 大香蕉动态97| 国产骚屄大鸡巴视频| 欧美l黄色一级网站| 草小骚逼福利视频| 抽插免费视频网站| 91蜜臀无码人妻久久精品竹菊| reav 一区二区| 中文有码1| http://hzwyli.com/| 丰满人妻一区二区三区60| 极品美女日逼视频| 最新美女视频91| 免费久久九九农村妇女操屄一区 | 国内久久悠悠|