亚洲色图10p,久久婷婷五月综合色欧美蜜芽,成人毛片无码一区二区三区,亚洲成av人在线视

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

rack cylinder Sold to Angola

Release time:2023-11-13 11:19:26 Hits: Current position: Home > News

This article mainly introduces:

Angola hydraulic cylinder,rack cylinder manufacturer,rack cylinder

Angola rack cylinder

(Angola rack cylinder,produced by Hengyu Group)

rack cylinder are widely used in Angola,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed rack cylinder for customers from Angola.

Introduction to rack cylinder:

The advantages and disadvantages of the rack cylinder: the surface of the rack cylinder by painting, coating protection treatment, bright luster is not easy to rust, all raw materials of the rack cylinder through the top heat treatment, high manufacturing precision, belongs to the precision machinery, has a simple structure, stable quality, high mechanical efficiency, easy to achieve automation and many other advantages. However, hydraulic technology also has the shortcomings of oil leakage, oil temperature change affecting the control of running speed, noise, expensive cost and high maintenance cost.

When the rack cylinder is installed, it is necessary to ensure that the direction of the connecting head at the top of the piston rod should be consistent with the direction of the rack cylinder head, earring (or middle hinge shaft), and ensure the straightness of the whole piston rod during the advance and return process to prevent rigid interference and cause unnecessary damage.

rack cylinder to reasonable use of hydraulic oil: strict hydraulic oil selection off. Hydraulic oil is selected in strict accordance with oil standards. The selection of good quality hydraulic oil can effectively prevent bubbles in the working process of the hydraulic system. When choosing the oil, it should be selected according to the lowest temperature in different regions, and fill the hydraulic oil according to the dipstick standard, and at the same time, it should also keep the hydraulic system clean (when filling the hydraulic oil, it should prevent the water and other impurities into it), and often check the oil quality, oil level and oil color of the hydraulic oil. If blisters and bubbles are found in the hydraulic oil. When the oil becomes milky white, the source of the air in the oil should be carefully found and eliminated in time.

How the cavitation of the rack cylinder is formed: With the gradual rise of pressure, the gas in the oil will become bubbles, when the pressure rises to a certain limit value, these bubbles will break under the action of high pressure, so that the high temperature and high pressure gas will quickly act on the surface of the parts, resulting in cavitation of the rack cylinder, resulting in corrosive damage to the parts.

Answers to some questions about rack cylinder:

How to repair if hydraulic shears cylinder oil leakage?
The hydraulic cylinder is generally disassembled and the sealing ring is replaced. There are generally two ways to install the ends of the hydraulic cylinder. The larger hydraulic cylinder is mostly flanged disc type, which is screwed to the middle cylinder block by several bolts, the bolts are removed, and the cylinder head is slowly pulled out. The smaller hydraulic cylinder, the cylinder block and the head itself are threaded, and the rotating end cap can be removed from the cylinder block. If you do not understand the hydraulic cylinder, it is best to ask someone to deal with it. It is easy to damage the sealing ring and internal surface during disassembly.

What is the reason for the hydraulic cylinder sticking out and not retracting?
There are two reasons: First, the problem with the seal, if there are two seals on the piston, the top seal is broken. Second, when the hydraulic pressure itself is designed, the rod cavity area is too small, so that the desired return force can not be achieved during the return trip. You can first check whether the coupling is damaged; Then see if the relief valve in the oil line block is blocked. If the use time is too long, it needs to be cleaned, the hydraulic oil is very dirty and can block oil block. Electromagnetic directional valves can also be checked, but the chance of problems is relatively small, unless there is a product problem.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
美国AV解说爽| 好吊视频一三五区| 大长腿 一区二区三区 在线观看| 99热这里只有精品最新2| 日韩一级福利| 久久精品人妻一区二区三区蜜桃 | 国产夫妻手机自拍小视频在线| 激情七月丁香婷婷一区二区| 国产白嫩被弄高潮91| 一本区道大香蕉| 午夜美女免费福利| 一级欧美一级日韩全集免费| 噜噜色综合激情| 老司机激情福利| 国产99一区二区三区| 好看的中文字幕一区二区视频| 综合视频乱九九九| 紧身裤美女福利视频| 美女被躁到**嗷嗷叫视频| 韩国中学生激情性爱网| 国产东北骚熟女| 黑人亚洲人妻中文字幕| 女主播被操| 曰韩欧美综合性爱| 手机av男人在线| 嗯嗯呢哪啊好爽视频| 国产日韩RB| 来安县| 美女插B直播视频91| 老熟女挑战刺激一区二区三区| 在线免费观看AV片一区| 中文字幕视频一区无码系列| 抽插小骚逼| 国产嗯嗯啊啊啊| 国产一区二区视频免费老女人妓女| 内江市| 熟妇人妻系列AV无码一区二区| 操国产美女小b| 一级欧美在线观看| 轮流老熟女| 日韩国产AV一区二区三区四区|