亚洲色图10p,久久婷婷五月综合色欧美蜜芽,成人毛片无码一区二区三区,亚洲成av人在线视

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

steering cylinder Sold to America

Release time:2023-11-20 09:49:10 Hits: Current position: Home > News

This article mainly introduces:

America hydraulic cylinder,steering cylinder manufacturer,steering cylinder

America steering cylinder

(America steering cylinder,produced by Hebei Hengyu company)

steering cylinder are widely used in America,because of powerful torque,clever hydraulic energy conversion,simple structure and reliable operation.So our company has designed steering cylinder for customers from America.

Introduction to steering cylinder:

The steering cylinder is not the same as the steering cylinder, because the pressure of the pneumatic system is generally within the range of 0.2-1.0Mpa, the steering cylinder can not be used as a high-power power component, but the steering cylinder can be used as a relatively large power component, or the steering cylinder system can be used.

The steering cylinder body is commonly made of No. 20, 35, 45 seamless steel pipe, and the steel pipe is honed or rolled to achieve the roughness requirement within 0.4μm. The low pressure steering cylinder can use 20 steel pipe, and the high pressure steering cylinder can use 45 steel pipe.

The difference between the plunger steering cylinder and the piston steering cylinder is that the piston in the steering cylinder is replaced by a shaft plunger, which is used in hydraulic transmission requiring a long mechanical stroke, and can only input pressure oil from one direction, pressurize in a single direction, and form a thrust to push the plunger to move. The return trip of the plunger depends on the plunger itself to fall, and some rely on the spring to push back to the original position. Usually used plunger type steering cylinder, its inner hole does not need mechanical finishing, as long as the plunger round grinding can be assembled.

When producing oil steering cylinders, there are two processing processes, grinding and rolling, the latter is better than the former. Rolling machining is a kind of non-cutting machining, using the plastic deformation of the metal at room temperature, so that the micro roughness of the workpiece surface is flattened to achieve the purpose of changing the surface structure, mechanical characteristics, shape and size. Therefore, this method can achieve the two purposes of finishing and strengthening at the same time, which can not be done by grinding.

Answers to some questions about steering cylinder:

What is the meaning of cylinder ejection on the injection mold, and what is the difference between cylinder ejection and ordinary ejection?
Usually requires the front die ejection will use the cylinder to drive the thimble plate to achieve the ejection of the thimble. There is also a case that the mold is very large or long, and the balance of the ejector rod of the injection molding machine is not enough, and the cylinder ejector will also be used.

How to remove the lifting cylinder from the forklift truck?
The lifting cylinder is generally fixed on the door frame, and there are screws under and above it, and it is OK to loosen the screws with a wrench on the top. However, we must pay attention to ensure safety and prevent damage to the cylinder or safety accidents.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
欧美日韩国产精品成人麻豆| 精品奶水区一区二区三区在线观看|久| 色逼AV一区| 嗯~啊操逼视频| 手机小视频| 超碰在线日屄观看| 大鸡巴cao b| 欧美操逼一级毛| 淫妇AV资源| 收看日本十七岁的免费的黄色录像| 美女天天操天天日| 日韩老男人性爱超清晰| jibacsib| 中文字幕 嗯啊| 性爱色吧91在线| 青青操原在线视频播放| 日韩性爰视频网站| 成人大香蕉一区二区三区| 大黑吊操人妻| 大黑鸡吧操视频| 日韩淫少妇| 荣成市| 日韩 欧美 在线观看 无需安装| 成人大香焦一本道| 国产AV原亚洲| 日逼视频动态| 欧美福利在线免费观看| 国产精品女人爽到高潮| 激情文学亚洲AV| 国产白虎主播操逼| 亚洲操一操| 国产和美女操逼| 操美女骚逼爽| 美女被操操逼逼| 主播操逼3级片小视频大全| 久久狠av| AV天堂男人网在线播放| 老女人操逼日韩| 阿坝县| 黑人大黑逼| 操欧美老骚的视频|