亚洲色图10p,久久婷婷五月综合色欧美蜜芽,成人毛片无码一区二区三区,亚洲成av人在线视

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

tailboard balance cylinder Sold to Kuwait

Release time:2023-11-10 08:35:31 Hits: Current position: Home > News

This article mainly introduces:

Kuwait hydraulic cylinder,tailboard balance cylinder manufacturer,tailboard balance cylinder

Kuwait tailboard balance cylinder

(Kuwait tailboard balance cylinder,produced by Hebei Hengyu company)

tailboard balance cylinder are widely used in Kuwait,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed tailboard balance cylinder for customers from Kuwait.

Introduction to tailboard balance cylinder:

The tailboard balance cylinder is not the same as the tailboard balance cylinder, because the pressure of the pneumatic system is generally within the range of 0.2-1.0Mpa, the tailboard balance cylinder can not be used as a high-power power component, but the tailboard balance cylinder can be used as a relatively large power component, or the tailboard balance cylinder system can be used.

After chrome plating of the piston rod of the tailboard balance cylinder, the surface flatness is not fully treated: After chrome plating of the piston rod surface, the method of post-plating polishing should be changed to post-plating polishing. Although it is necessary to increase the thickness of the coating before grinding (generally increased by about 0.02 in the diameter direction), it can remove chrome plating defects well, and test the binding force of the coating. In addition, due to the micro-roughness of the grinding surface, the trough can store lubricating oil, which can improve the wear resistance and extend the service life.

The repair method of the tailboard balance cylinder: the repair of the tailboard balance cylinder must use brush plating. This is because this repair method can be carried out on site, and the repair effect is good. In this way, loading and transportation can be eliminated to shorten the repair time and improve work efficiency. In addition, the coating obtained by brush plating has good binding force and will not have obvious boundaries. Moreover, the repair surface has high hardness and good wear resistance.

When the hydraulic oil is not pumped into the tailboard balance cylinder, it is necessary to check whether the tubing, oil circuit, especially the hose joint has been blocked, and the relevant oil circuit from the tailboard balance cylinder to the pump should be checked in turn and blocked; Check whether the seal between the taper valve and the seat of the relief valve is good; Check whether the solenoid valve spring is damaged or whether the solenoid coil is burned out; Whether the oil circuit is switched is insensitive.

Answers to some questions about tailboard balance cylinder:

How to calculate the tonnage of the hydraulic press? Example: The input cylinder pressure is 5Mpa, the end area of the cylinder piston is 100mm, and how much is the thrust tonnage?
F=P*S=5*10^6*3.14*(1/20)^2=39250N.

What are the differences between hydraulic cylinder and pneumatic cylinder, what are their advantages and disadvantages?
Hydraulic Cylinder: small body and large force, constant speed and variable speed (easy to change), the adjustment of output is also convenient, and the degree of freedom of transmission is high. However, maintenance costs and installation costs are high, and there is the trouble of mild oil pollution. Pneumatic Cylinder: easy to control, low price, easy access to energy. But the force is small, and can not achieve the effect of stable speed. The gas-liquid pressurized cylinder has the advantages of both of the above: environmental protection and energy saving, easy control, and simple adjustment. However, the output of the trip has certain restrictions, so it is more suitable for short trips, large output, but also environmental protection and energy saving and low configuration of the occasion. Because the pressure used in the pneumatic system is generally in the range of 0.2-1.0Mpa, the cylinder is not suitable for high power component.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
日本丰满老熟女视频| 一到本av| 亚洲女人操B| 淫骚美女护士色诱| 欧美美女被操在线观看| 韩国av专区| 大大国产乱子| 啊,不要,我好疼在线视频| 淫乱亚洲一区小说| 日韩欧美国产精品日逼视频| 婷五月天一区二区| 又粗又硬的日逼视频| 国内综合激情网| 美女成人大鸡巴视频图片| 亚洲日本操| 嗯嗯国产在线观看| 色逼逼插逼逼午夜福利视频| 啊啊啊日韩精品| 后入少妇大屁股| 丁香色婷婷五月| 被公侵犯国产| 国产夫妻性生活在线| 熟女视频一区二区三区四区| 成人福利视频一区二区三区柚子视频 | 精品久久久久久中文字幕一区| 亚洲熟女人妻一区二区三区| 五月色婷婷成人| 91精品国产亚洲在线| 夜夜嗨视频网址| 青青草插逼视频| cao白虎骚穴| 91啦中文熟女| 日本 五月 婷婷| 亚洲精品伊人网| 美女爆操男人鸡巴av| 96色婷婷在线视频| 七十路无码视频在线播放| 大香蕉视频在线观个看| 透逼视频网址在线观看| 黑料在线视频一区二区| 日本手机在线观看|