亚洲色图10p,久久婷婷五月综合色欧美蜜芽,成人毛片无码一区二区三区,亚洲成av人在线视

High quality hydraulic equipment manufacturers!
TELL:+8613184968882

tension cylinder Sold to Chile

Release time:2023-11-20 09:49:08 Hits: Current position: Home > News

This article mainly introduces:

Chile hydraulic cylinder,tension cylinder manufacturer,tension cylinder

Chile tension cylinder

(Chile tension cylinder,produced by Hebei Hengyu company)

tension cylinder are widely used in Chile,because of clever hydraulic energy conversion,simple structure and reliable operation,excellent temperature resistance.So our company has designed tension cylinder for customers from Chile.

Introduction to tension cylinder:

tension cylinder spool stuck or valve hole blocked How to solve: When the flow valve or direction valve spool stuck or valve hole blocked, the tension cylinder prone to misoperation or action failure. At this time, the contamination of the oil should be checked; Check whether dirt or colloidal deposits are stuck in the spool or blocking the valve hole; Check the wear of the valve body, clean and replace the system filter, clean the fuel tank, and replace the hydraulic medium.

After chrome plating of the piston rod of the tension cylinder, the surface flatness is not fully treated: After chrome plating of the piston rod surface, the method of post-plating polishing should be changed to post-plating polishing. Although it is necessary to increase the thickness of the coating before grinding (generally increased by about 0.02 in the diameter direction), it can remove chrome plating defects well, and test the binding force of the coating. In addition, due to the micro-roughness of the grinding surface, the trough can store lubricating oil, which can improve the wear resistance and extend the service life.

Before the tension cylinder is removed, the system should be unloaded, the loop pressure is zero, the oil source should be cut off, and the oil port should be blocked after the oil port distribution pipe is loosened.

When the long-stroke tension cylinder rotates horizontally, the piston rod bends due to its own weight, causing the guide sleeve and piston to produce biased load, resulting in tension cylinder head seal damage, oil leakage, and piston sleep in the tension cylinder. The following measures can be taken: increase the piston plan to adjust the piston outer circle and process it into a convex drum, so that the piston can self-position, improve the force situation, and reduce and avoid pulling the tension cylinder; The piston and the piston rod are connected with a spherical joint.

Answers to some questions about tension cylinder:

Do the collecting cylinder, distributing cylinder and distributing cylinder on the organic heat carrier boiler need to be notified separately as the pressure vessel for construction?
Do not need to be installed as a separate pressure vessel to inform, according to the organic heat carrier boiler can be informed. Write a "special equipment installation, renovation and maintenance notice" issued on it.

Why does the hydraulic cylinder go up to the top and then slowly go down?
Leakage in the cylinder or the hydraulic valve that controls the cylinder, can be replaced and removed. Or add a pressure retaining valve to the hydraulic system to ensure pressure.

Back to list Recommended article

Leave a message if you have any questions.

Send
Email

Email:hsslrubbertech@gmail.com7x24 hours

Glad to receive your consultation!:

Service
Tel

+8613184968882
7x24hours service

Add
Wechat

Add Wechat
TOP
白嫩少妇人妻| 大鸡巴插BB视频| 干BAv视频| 大鸡巴爆力肏丝袜美女视频| 国产吧国产吧av| 激情国产日韩唯美| 国产3区夫妻自拍性生活视频| 肏b美女视频免费| 五月天日本成人网站| 美女屄被操| 国产在线观看高清无码后入内射| 操逼精品免费视频| 天天躁AAAAXX乄X| 夜夜伊人综合| 一区二区三区四区在线观看国产日韩| 乱线观看大香蕉| 嗯嗯啊啊啊不要操视频| 欧美白拍视频| 欧美一级片| 日韩操鸡视频网站在线观看| 日韩美女全裸操逼| 国产黄色录像。| 久久人妻。| 亚洲骚骚逼| 文化| 欧美黑丝色一乱| 亚洲AV成人精品熟女久久久| 日韩黄色美女视频| 爱综合激情干| 亚洲无码女人肛交视频| 嗯嗯…啊啊啊在线视频| 欧美口交91| 欧美亚韩肥逼| 中出无码中文字幕在线观看免费| 五月婷婷国产综合| 五月激情av9在线| 啊啊啊啊操逼| 五月激情六月亚洲| 男女酒店怼鸡巴网站| 91少妇色午夜在线| 捆绑桃乃木视频|